Comparison of gas injectors working parameters
Parameter | VERDE | ROSSO | I-PLUS | ARGENTO
3 Ohm |
ARGENTO
2 Ohm |
Working pressure |
from 0,5 to 3,0 bar |
from 0,5 to 3,0 bar |
from 0,5 to 10,0 bar |
from 0,5 to 4,5 bar |
from 0,5 to 4,5 bar |
Working voltage |
10,8-14,4 V |
10,8-14,4 V |
10,8-14,4 V |
10,8-14,4 V |
10,8-14,4 V |
Coil resistance |
3,0 Ohm |
3,0 Ohm |
2,0 Ohm |
2,8 Ohm |
2,0 Ohm |
Maximal current absorption |
4,0 A |
4,0 A |
4,4 A |
4,0 A |
6,0 A |
Tension of sustaining current |
1,0 A |
1,0 A |
2,0 A |
1,0 A |
1,0 A |
Minimal opening time of injector |
3,6 ms |
3,3 ms |
2,6 ms |
2,8 ms |
2,3 ms |
Maximal opening time of injector |
25 ms |
25 ms |
25 ms |
25 ms |
25 ms |
Gas inlet diameter |
Ø 12mm / Ø 16 mm |
Ø 12mm / Ø 16 mm |
Ø 12mm / Ø 16 mm |
Ø 7 mm / Ø 10 mm / Ø 12mm / Ø 16 mm |
Ø 7 mm / Ø 10 mm / Ø 12mm / Ø 16 mm |
Type of nozzles` thread |
M8x1 |
assembly with a pin |
1/8" NPT |
M8x1 |
M8x1 |
Calibrated nozzles diameter |
Ø 1,0 - 3,5 mm |
Ø 1,0 mm (to drill according to nozzles selection table) |
Ø 1,0 - 3,0 mm |
Ø 1,0 - 3,5 mm |
Ø 1,0 - 3,5 mm |
Working temperature |
-20°C ÷ 120°C |
-20°C ÷ 120°C |
-40°C ÷ 120°C |
-20°C ÷ 120°C |
-20°C ÷ 120°C |
Possibility of single sections assembly |
- |
x |
- |
x |
x |
Available versions |
1 section (SW831.IGV) 2 sections (SW832.IGV) 3 sections (SW833.IGV) 4 sections (SW834.IGV) |
1 section (SW831.IGRK) 2 sections (SW832.IGRK) 3 sections (SW833.IGRK) 4 sections (SW834.IGRK) |
2 sections (SW602S) 3 sections (SW603S) 4 sections (SW604S) |
1 section (SW831.IGA) 2 sections (SW832.IGA) 3 sections (SW833.IGA) 4 sections (SW834.IGA) |
1 section (SW821.IGA) 2 sections (SW822.IGA) 3 sections (SW823.IGA) 4 sections (SW824.IGA) |
Homologation |
67R-01 / 110R-00 |
67R-01 / 110R-00 |
67R-01 / 110R-00 |
67R-01 / 110R-00 |
67R-01 / 110R-00 |